MXH20-5Z

The MXH series from SMC combines a double-acting pneumatic drive and a guided table in a compact unit. Its recirculating linear guide enables the load to be moved despite existing forces in pitch, yaw and roll directions.

Features:
Movement is provided by a double-acting pneumatic cylinder integrated into the table. The recirculating linear guide holds the load during the stroke and absorbs pitch, yaw and roll moments. Rubber bumpers fitted at both ends cushion the end positions. Operation requires no lubrication.
Mounting is possible in four directions. The pneumatic connection can be made in three directions, which makes integration easier when access to the connections is restricted. Switches can be added to monitor the position of the table.
The ordering code makes it possible to identify the main configurations:
• MXH: series designation
• 6, 10, 16 or 20: bore diameter, in mm
• 5 to 60: standard stroke, in mm
• switch order number after the stroke: type of associated switch
• S after the switch order number: one switch; without S suffix: two switches
• XB13: low-speed version, from 5 to 50 mm/s
• XC3: special port position
• XC19: intermediate stroke with spacer
• XC22: fluororubber seals
• XC79: additional machining such as tapped holes, bores or pin holes

Specifications:
• Bore diameter: 6, 10, 16 and 20 mm
• Standard strokes: 5, 10, 15, 20, 25, 30, 40, 50 and 60 mm
• Pneumatic connections: M5 × 0,8
• Minimum operating pressure: 0,15 MPa for Ø 6 mm; 0,06 MPa for Ø 10 and 16 mm; 0,05 MPa for Ø 20 mm
• Maximum operating pressure: 0,7 MPa
• Proof pressure: 1,05 MPa
• Ambient and fluid temperature without switch: -10 to +70 °C, no freezing
• Ambient and fluid temperature with switch: -10 to +60 °C, no freezing
• Piston speed: 50 to 500 mm/s
• Permissible kinetic energy: 0,0125 J for Ø 6 mm; 0,025 J for Ø 10 mm; 0,05 J for Ø 16 mm; 0,1 J for Ø 20 mm
• Stroke tolerance: +1,0/0 mm
• Permissible pitch moment: 0,81 to 5,86 N·m depending on bore
• Permissible yaw moment: 0,81 to 5,86 N·m depending on bore
• Permissible roll moment: 1,40 to 11,66 N·m depending on bore
• Running parallelism: ≤ 0,05 mm for strokes of 5 to 30 mm; ≤ 0,1 mm for strokes of 40 to 60 mm

Standards:
• RoHS: RoHS compliance concerns the restriction of certain hazardous substances