Rodamiento de rodillos cónicos Timken 31330T179DB, Diámetro exterior: 320 mm | Diámetro interior: 150 mm | Anchura: 179 mm
Conjunto de Rodamiento de Rodillos Cónicos 2TS
Ver información técnicaReferencias
Timken:31330T179DB
Rubix:798826864000
fabricante:190038848
EAN:0053893369716
Resumen técnico
| Diámetro interior | 150 mm |
|---|---|
| Diámetro exterior | 320 mm |
| Anchura | 179 mm |
Detalles de producto : 31330T179DB
Rodamiento de rodillos cónicos Timken LM603049-90033 tipo TS. Los rodamientos de rodillos cónicos Timken® soportan cargas radiales y axiales, incluso en las condiciones más implacables. Consiste en un conjunto de anillo interior y el anillo exterior. Por lo general se monta como uno de un par opuesto. Durante el montaje del equipo, los rodamientos de una hilera se pueden "ajustar" a la holgura (juego) o condición de precarga requerida para optimizar el rendimiento.
Cualidades
Engineered to deliver higher speeds, heavier loads and longer life.
Unrivaled technology and engineering support.
Two single-row bearings are mounted in a back-to-back (also known as indirect mount) configuration (2TS-IM).
Outer ring and inner ring spacers control the axial internal clearance, or bench end play (BEP) to eliminate the adjustment procedure.
Internal axial clearance is marked on the spacer for identification and reorder purposes.
Internal axial clearance is factory preset to create a matched bearing assembly (MBA).
Components cannot be mixed with other components from another bearing asse+H19mbly.
Outer ring spacer has oil slots.
Metric 2TS face-to-face MBAs are indicated in the part number as "DB"
Unrivaled technology and engineering support.
Two single-row bearings are mounted in a back-to-back (also known as indirect mount) configuration (2TS-IM).
Outer ring and inner ring spacers control the axial internal clearance, or bench end play (BEP) to eliminate the adjustment procedure.
Internal axial clearance is marked on the spacer for identification and reorder purposes.
Internal axial clearance is factory preset to create a matched bearing assembly (MBA).
Components cannot be mixed with other components from another bearing asse+H19mbly.
Outer ring spacer has oil slots.
Metric 2TS face-to-face MBAs are indicated in the part number as "DB"
Aplicaciones
Gear reduction units / Industrial machines
Información técnica
Atributos
| Peso con embalaje | 60727,9 g |
|---|---|
| Diámetro interior | 150 mm |
| Diámetro exterior | 320 mm |
| Anchura | 179 mm |
| Holgura del rodamiento | cn |
Mostrar UNSPSC/ECL@SS/Customs
19.099,49 € Sin IVA
/ unidad
23.110,38 € IVA incluido
- Entrega estimada (15) días